Produkter, digitale produkter og dokumenter

Hos PERI tilbyder vi komplet løsningsekspertise til alle krav til forskallings- og stilladsteknologi inden for konstruktion, vedligeholdelse og renovering. Innovative forskallings- og stilladssystemer med skræddersyede løsninger, service og teknologi garanterer vores kunder rentabilitet, effektivitet og sikkerhed.

Find den rigtige løsning til dine behov

Time-saving forming with MX tie technology as well as the best concrete finishes<br/>
DUO - Den universelle og lette systemforskalling til in-situ støbning af vægge, søjler og dæk.
Continuously adjustable circular formwork for radii greater than 1.00m without panel alterations<br/>
Reliable concreting of single-sided walls up to 8.75 m high<br/>
Economical forming without ties, for all radii, also with special formwork<br/>
Flexible girder wall formwork, also for high-grade architectural concrete surfaces.<br/>
The flexible and adjustable slab formwork with GT 24 Formwork Girder<br/>
skymax-slab-table
The slab table with steel walers for large formwork areas and heavy pre-fabricated parts
De mange forskellige praktiske funktioner giver hurtig og sikker håndtering – herunder for eksempel justeringsmøtrikken, der angiver retning for aflastning, eller den ergonomiske G-bøjle, der ikke sætter sig fast.
The versatile lattice girder with high load-bearing capacity.
All heights, all cross-sections, regardless whether square or rectangular-shaped<br/>
Det universelle modulære klatresystem til en lang række anvendelser.<br/>
With PERI SCS, the loads from the fresh concrete pressure are transferred without formwork ties through the brackets into the climbing anchors of the previous concreting section.<br/>
The Self-Climbing System ACS-R with the one-sided reinforcement scaffold in advance.
CB Klatresystem giver sikre arbejdsforhold og bruges normalt til at understøtte store, forankrede vægforskallinger.<br/>
The universal working and safety scaffold.<br/>
HR Render image of the PERI VTC Tunnel Carriage
Formwork carriage used on the steel substructure for the construction of carriageway slabs
The lightweight for new construction and refurbishment projects
VARIOKIT konstruktionskit - alle systemer
Either the Heavy-Duty Tower as the Truss Girder are adjustable to the correct height and length.
The system consists of different types of load and length optimized frames, which enable to continuously create every span with the corresponding combination.
Shoring system for very large loads in bridge constructions as well as for special applications in industrial construction
The movable, anchor-free solutions for bridge infrastructure. Perfect for bridges over 150m long.
The fast, rentable solution with the best handling and reduced material quantities
Construction of superstructures using the balanced cantilever method – fast and dimensionally-accurate
The mobile solution installed below for bridges over 150 m long
Scaffold-free cantilever formwork for steel composite and precast concrete bridges
3D Formwork Units: Precision-made for an individual design
Concrete release agent for all formwork and equipment
The DK and SK tie systems serve to ensure subsequent, reliable sealing of tie points.
The cost-effective solid web girder
Anvendes som en let og omkostningsbesparende dækstøtte og som et økonomisk fordelagtigt understøtningstårn.
RS elementstøtteprogram, med længder op til 14 meter<br/><br/>
The MXK Bracket System provides high level of safety whilst requiring little installation effort. The lightweight system components are manually-assembled on the ground.
Modular Reinforcement Scaffold for efficient work.<br/>
The lightweight stair tower for flexible access solutions
Stair geometry and landing arrangement meet the requirements for public access.
For high requirements regarding load bearing capacity and accessibility.
The suspended scaffold can be manoeuvred with little effort due to smooth plastic rollers.
Modular Reinforcement Scaffold for efficient work.<br/>
For wide-span working platforms and temporary pedestrian footbridges
Extremely flexible work scaffold for a wide range of applications.<br/>
The latest addition to the PERI UP scaffolding toolkit, PERI UP Easy is designed to improve both safety and productivity for façade applications.
PERI UP Easy EVOTOP 100
Extremely adaptable and with a high load-bearing capacity
PERI UP Inddækning
LGS standard components are the basis for variable roof shapes.
LGS standardkomponenter er grundlaget for variable overdækningsformer.
PERI UP Flex Understøtningstårn<br/>
The tool-free assembled prop for loads up to 200 kN
The large-size formwork panel for almost joint-free fairfaced concrete finishes.
Cost-effective plywood for slab formwork<br/>
The traditional formwork panel made of three layers
Lightweight plywood panel with high load-bearing capacity
The PERI Birch formwork panel is a high-quality plywood for almost any type of application.<br/>
This plywood is high-quality and lightweight and therefore ideal for construction purposes.<br/>
Den Materialbedarf für Gerüstlösungen einfach und schnell einschätzen
PERI Extended app ikon
The MULTIFLEX Girder Slab Formwork Configurator is available as web app in German and English.
The Formwork Load Calculator is available as web in German and English.
The CAD program for professional work preparation
BIM2form for Autodesk Revit